|
|
| ZINC POT SPARES |
| Zinc pot mobile device |
|
Walking mechanism is composed of walking wheel, drive, brake, drag chain and bridge device, etc.The pot can walk smooth and precise positioning when zinc liquid full of pot.
Each pot body bottom is welding base, lower part of each base four corners equipped with wheel, two of them assembled with belt drive, drive unit is composed of reduction gear box with a drive motor. Gear box directly drive bogies. Used to drive plating pot put in working position and parking position. Movement speed is about 1.66 m/min. Zinc pot mobile system should ensure that alloy liquid in the process of operation will not overflow by shaking. Therefore, need to control drive motor speed system, starting and stopping cannot fast.
In the whole process of zinc pot mobile system, sound and light alarm work continuously. Any dangerous situation occurs, emergency button will be installed in the control cabinet of the press to stop the movement of the zinc pot.
With a soft cable to power the inductor and zinc pot drive. In the process of zinc pot, in order to make the cable smooth and consistent, cable set on steel drag chain, drag chain end fixed at the end of the input point, the other end is connected to the pot shelf. The drag chain end as the location of the zinc pot moving back and forth. Plating pot movement is controlled by a mobile operating ark online. Provide interlocking set of ensure mobile conflict will not occur. Cable terminals box and plating pot mobile operating cabinet arranged in pit.
|
|
|
|
|
|
|
|
|
